Main features:

Part Number Dekimado NFC USB Reader

RF Carrier Frequency 13.56MHz ± 50 ppm

Supported Standards ISO 14443 A/B, NFC IP-1, ISO 18092, ECMA 340

Supported RF transmission speeds 106 / 212 / 424 kbps

Supported Tag ICs 

NFC forum tag type 1 through SCM-specific 

NFC forum tag type 2 through PC/SC-defined APDUs 

NFC forum tag type 3 through SCM-specific APDU 

NFC forum tag type 4 through PC/SC APDUs 

ISO/IEC 14443-4 PICC type A and type B

MIFARE (Classic, Ultralight, Ultralight C, MIFARE PLUS , DESFire, DESFire EV1 2/4/8k)

Non-Secure FeliCa

Innovision Topaz

Supported NFC Modes Reader Writer Mode , Peer to Peer Passive

Host Interface USB 2.0 (USB 1.1 / 3.0 compliant), 150cm / 59 Inch USB cable, Type A connector

Host Communication Speed 12 Mbps (USB2.0 full speed)

Host OS Support Microsoft Windows® 2000/XP/Vista/7 (32/64Bit) / Microsoft Windows® CE 5.0/6.0

MacOS

Linux 

Host Communication Driver PC/SC 2.01.09

Indicator Green LED

Power Supply  USB Bus powered

Power Consumption <200mA / 260μA Power down mode

Reading Distance < 45 mm / < 1.97 Inch depending on tag type and size

Dimension 80x60x15mm

Weight 116g

Operating Temperature Range 0° to +60°C / +32 to +140 F

Storage Temperature Range-20 to +60°C / -4 to +140 F

Operating humidity rangeUp to 95%RH non condensing

Firmware Version2.7

Compatible driver SCM Microsystems 3712 v1.09

Certifications / Compliances WHQL, RoHs compliant

**Technical data are subject to change without notice

Features

1.Support for USB2.0(PC/Andriod/window mobile, smart phones)
and 30pin(iPhone(1,3G,3GS,4G), iPad(1,2))
2. Support for iOS(3.x and higher), Andriod (2.x and higher),OS X(10.5.6 and higher,Windows (xp and higher),Linux system(2.6 and higher)
3. Compliant with ISO7816 ,PC/SC, CCID specification, EMV2000 Level 1 specification, MFI specification
4. Reads from and writes to all ISO 7816-1,2,3,4 microprocessor cards, T=0 and T=1 protocols
5. Support for full-parameter PPS protocol
6. Supporting access to ISO 7816-3 standard-sized IC cards and
TF interface ISO 7816-4 microprocessor cards.



Parameter

Interface Type: Full speed Micro-USB2.0（12M bps) / Apple 30pin
Power Supply Mode: USB 5V / 30pin 3.3V
Communication Protocol: PC/SC,CCID Private API(PC/SC)
Card Interface: ISO/IEC 7816-1/2/3 microprocessor card /TF interface/  ISO 7816-4 microprocessor card
Data Transfer Rate: 9600-38400bps
Supported Operating System: iOS(3.x and higher), OSX(10.5.6 and higher), Andriod 2.x, linux(2.6 and higher), windows CE (5.0 and higher),windows(xp and higher)
Operating Temperature: 0°C ～ 50 °C
Operating Humidity: 20 ～ 85％
Standard and Certification: SO-7816 Class A, B, C ( 5V, 3V,1.8V)、
EN 60950/IEC 60950、 EMV 2000 Level 1

FEATURES

• Operating System Window2000, Windows XP, Window Vista   
• Smartcard Interface ISO7816- 1/2/3/4   
• Host Interface USB 1.1, 2.0
• Compatible Protocol T=0, T=1   
• Compliance K-Cash Compliant    
• EMV Compliant    
• Multos Compliant    
• Java Card Compliant    
• Microsoft PS/SC(WHQL) Compliant    
• CCID complaint  
• Input Voltage USB bus-input voltage : 4. 5V ∼ 5. 5V   
• Power consumption under 100mA   
• Operating Temperature 0 ℃ ~ 75 ℃   
• Dimension 47mm(L) X 20mm(W) X 12mm(H)   
• MTBF 100,000 times   
• Certification CE    FCC    MIC
• Now available at Apple Store: http://store.apple.com/us/product/H2312LL/A

• @MAXX™ family offers various combination of flash memory, along with ID1 or SAM smart card based security and functionality.
  Plugged into any free USB port, this mobile device offers secure high-performance and cost-efficient handling of sensitive data.
• The built-in smart card reader, on-board flash memory make @MAXX™ the ideal device for implementing numerous secure applications.
• In combination with a SIM-sized dual interface smart card and its built-in antennaconnected to C4/C8, @MAXX™ enables ISO14443 and Mifare based applications.
• @MAXX™ can operate in PC connected mode and provides contactless smart card functionality in autonomous mode.

• Flatbed Stylish Design
• Supports USB 2.0
• High speed 848 kbps
• Reliable drivers for all PC OS
• Easy installation - with .exe/.msi
• Compliance to all relevant standards
• Supports 13.56MHz three ISO standards for contactless cards (ISO 14443 A/B and 15693*)
• Supports ISO 7816 and EMV (Europay, MasterCard, Visa) industry standards for contact cards or SAM slot available

• Contactless Smart Cards Supported

  • Philips: MIFARE®, DESFire®, MIFARE ProX®, and i.code
  • HID: iCLASS®
  • Texas Instruments: TagIT®
  • ST Micro: x-ident, SR 176, SR 1X 4K
  • Infineon: My-d (in secure mode UID only)
  • Atmel: AT088RF020
  • KSW MicroTech: KSW TempSens
  • JavaCard: JCOP in RSA mode

*model dependent

• Multi-protocol 13.56MHz contactless reader:
• - ISO14443 type A & B & C
• - MIFARE
• - FeliCa™ (read/write possible)
• NFC Peer-to-peer communication
• PC/SC compliant
• Speed up to 848kbps
• Windows / MacOS / Linux supported

• DE-620 is multiprotocol reader that supports the global expansion in contactless schemes for e-Payment, e-Passport, secure transaction and access control.
• DE-620 is a high performance, fully interoperable reader that supports all major contact, contactless technology (with SAM slot for authentication) including,
• ISO7816-3/4
• Mifare
• DESFire
• ISO14443 Type A/B
• Sony FeliCa
• ISO18092 NFC with two operating mode
• It is PC/SC compliant and can also works as a dummy reader mode.
• DE-620 also supports higher communication speed from 212kbps, 424kbps, to 848kbps.
• A complete SDK for DE-620 is included to application developer and system integrators.

• Supports USB 2.0
• High speed 848 kbps
• Reliable drivers for all PC OS
• Easy installation - with .exe/.msi
• Compliance to all relevant standards
• Supports 125k Hz HID Prox card

• Ultra Slim Design
• Supports USB 2.0
• High speed 420kbps
• Reliable drivers for all PC OS
• Easy installation - with .exe/.msi
• Compliance to all relevant standards

• Ceremic white housing
• Supports USB 2.0
• High speed 336kbps - 420kbps*
• Reliable drivers for all PC OS
• Easy driver installation
• Compliance to all relevant standards
• Firmware upgradable
• One-hand operation with optional heavy base*

*model dependent

• ExpressCard or PCMCIA smartcard reader
• High speed 420kbps
• Reliable drivers
• Easy installation - with .exe/.msi
• Compliance to all relevant standards

Flexible point of sales and kiosk solution

Specification

• Built-in magnetic card decoder Yes
• Supported card types (module specific): ISO7816-(1-4) (T=1, T=0), SLE4418-4428,SLE4432/4442, SLE4436/5536, I2C memorycards
• Communications USB port
• Power Via USB port
• Current mA 45 - 65 mA
• Connectors USB type A
• Cable length 6 Ft (180 cm)
• Dimensions (LxWxH) 100 x 48 x 35 mm (SC add on)
• Total weight 150 g
• Operating temp. -20 C to 55 C
• Humidity 10% - 90% relative humidity
• Set-up menu Yes
• Quickset® factory default card Yes one step setup card customizable
• Flash memory upgrade Yes
• Selectable tracks Yes (separate track selection for both ISO & AAMVA)
• Selectable available tracks 1, 2, 3 Track swipe rates 2 : 125 ips at 75 bpi, 1, 3: 60 ips at 210 bpi
• Head life Over 1,000,000 passes
• Programmable sound on/off Yes
• Programmable carriage return Yes
• Programmable inter character delay Yes
• Programmable SS/ES selectable character Yes
• Parity and LRC data checking
• Built-in, audible and LED good read and error indicator
• Classifications supported (module specific) ABA, ANSI, ISO,AAMVA, CADMV, ISO 7816 (1-4)
• Certifications CE, FCC, UL, RoHS
• Support operating systems Win 7, Win 2008 ,Vista, Win 2003, Win 2000, XP,Win Ce, Unix

Thinking of building your own USB contact smart card reader? We have various chipset available for different requirement for your mix and match:

• PC/SC Compliant
• CCID Certified
• Windows, Linux, MacOS, Solaris, Unix driver ready
• Firmware upgradable (depends on model)
• EMV pre-certified
• serial / USB interface
• VPFN32/QFN32 housing
• 336k ~ 420k bps
• 1, 2, 3 cards support (depends on model)
• Minimum BOM components vs others

Print Method: Dye-Sublimation / Resin Thermal Transfer

Resolution: 300 dpi (11.8 dots/mm) continuous tone

Colors: Up to 16.7 million / 256 shades per pixel

Print Speed:**

• 7 seconds per card (K)*

• 12 seconds per card (KO)*

• 27 seconds per card (YMCKO)*

• 35 seconds per card (YMCKOK)*

Print Area:

• CR-80 edge-to-edge (3.36"L x 2.11"W / 85.3mmL x 53.7mmW)

• CR-79 (3.3"L x 2.04"W / 83.8mmL x 51.8mmW)

Accepted Standard Card Sizes:

• CR-80 (3.370"L x 2.125"W / 85.6mmL x 54mmW)

• CR-79 Adhesive back (3.313"L x 2.063"W / 84.1mmL x 52.4mmW)

Accepted Card Thickness: .009" – .040" / 9 mil – 40 mil / .229mm – 1.016mm

Input Card Cartridge Capacity: 100 cards (.030" / .762mm)

Output Hopper Card Capacity: Up to 30 cards (.030" / .762mm)

Software Drivers: Windows® 2000 / XP / Server 2003; Linux***

Warranty:

• Printer – Two years

• Printhead – Two years, unlimited pass with UltraCard™ cards

Options:

• Smart card encoding modules, field-upgradable by technician

• Magnetic stripe encoding module, field-upgradable

• 100-card output hopper with or without reject tray

• Dual-sided printing module

• Ethernet connectivity with internal print server (replaces USB connection)

• Printer cleaning kit

* Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay.

** Print speed indicates an approximate print speed and is measured from the time a card drops into the output hopper to the time the next card drops into the output hopper. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print.

*** Linux versions: Ubuntu 7.10, Red Hat Enterprise Desktop 5, Fedora Core 7, Fedora Core 8, openSUSE 10.3, Novell SUSE 10.

Print Method: HDP Dye-Sublimation / Resin Thermal Transfer

Resolution: 300 dpi (11.8 dots/mm)

Colors: Up to 16.7 million / 256 shades per pixel

Print Speed (batch mode):**

• 38 seconds per card / 95 cards per hour (YMC with transfer)*

• 46 seconds per card / 78 cards per hour (YMCK with transfer)*

• 70 seconds per card / 51 cards per hour (YMCKK with transfer)*

• 50 seconds per card / 72 cards per hour (YMCK with transfer and dual-sided,

simultaneous lamination)*

• 75 seconds per card / 48 cards per hour (YMCKK with transfer and dual-sided,

simultaneous lamination)*

Accepted Standard Card Sizes: CR-80 (3.370” L x 2.125” W / 85.6mmL x 54mmW)

Accepted Card Thickness:

• Print only: .030˝ (30 mil) to .050˝ (50 mil) / .762 mm to 1.27 mm

• Print/Lamination: .030˝ (30 mil) to .050˝ (50 mil) / .762 mm to 1.27 mm

Input Card Cartridge Capacity: 100 cards (.030˝ / .762 mm)

Output Hopper Card Capacity: 200 cards (.030˝ / .762 mm)

Software Drivers: Windows® 2000 / XP / Server 2003 / Vista

Print Area: Over-the-edge on CR-80 cards

Warranty: • Printer - Two years including one year of free printer loaner support (U.S. only); optional Extended

Warranty Program (U.S. only)

• Printhead - Lifetime; unlimited pass

Options:

• Card lamination module – single-sided or

• Magnetic stripe encoding dual-sided (simultaneous)

• 200-card input hopper (available soon)

• Smart card encoding (contact/contactless) • Dual-sided printing

• Door and cartridge locks

• Printer cleaning kit

* Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay

** Print speed indicates an approximate print speed and is measured from the time a card drops into the output hopper to the time the next card drops into the output hopper. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print.