• View how it works on YOUTUBE now!

• Best used for Office/School Conference Room, Toilet, Car Park, etc... it can save as much as 60%* or more electric bills.
• Auto On (model: TMSM100-1500) is a microwave sensor that detects minute motion of human bodies and reflective objects.
• It is operated by AC source and automatically on and off electric instruments including lamps. So it can drastically
  reduce the amount of electricity.
• It can be applicable to all the lamps.
• It can detect moving objects more than 20m and insensitive to dust, light, and ambient temperature etc.
• The attached CDS detects environmental light not to turn on the lamps to reduce unnecessary lighting.
• The electric instruments can be used in parallel connection if the overall power consumption of used electric instruments doesn’t exceed 1500W.
• The case when the load power is more than 1500W, an external solid state relay should be used additionally to switching the devices.

• It penetrates transparent to non-metallic material surface. Even in toilet behind the door to make sure the light is ON when people is inside

• Unlimited coverage (e.g. in CarPark): The coverage can be widened unlimitedly by parallel connection of Auto On’s.

* may varies depends on implementation

Adjustable:

• Coverage: The detection range can be adjusted according to the area of the application.
• Dimmer: It can adjust the power output during idle time, unlike other products only switching ON or OFF
• Idle time: adjustable on/off when motion is not detected from 1 sec to 30 min

Disadvantages of the infrared (IR) based sensor that our Microwave based sensor overcomes:

• The disadvantage of IR sensor is in its principle of operation. If an object that radiates heat approaches sensor that increases the temperature of atmosphere, the sensitivity of IR sensor will decreases drastically.

• The sensitivity of IR sensor is degraded at summer time when the environment temperature becomes similar to that of human body.

• The sensitivity of IR sensor is also degraded when a man moves very slowly and uses a blocker of theraml radiation, such as umbrella etc.

TMS100 is a X-band Doppler sensor transceiver module for motion detection. It consists of DR (dielectric resonator) oscillator, passive diode mixer and patch antennas to provide the most reliable solution in motion detection as the core OEM module.

Typical Application 

• Intrusion Alarms
• Automatic Door openers 
• Obstruction Warning Systems 
• Non-Contact Measurement 
• Microwave-PIR motion detector 
• Speed Measurement 
• Light dimming control

Detail Specification:

Size(LxWxH)	45x40x10mm3
Output Power (EIRP)	Typical :15.5  dBm
Power Supply	Typical :5  V
Current Consumption	Min : 30, Max : 60  mA
Settling time	Max : 6  uSec
Noise(3~80Hz)	Max : 10  uVrms
Received Signal	Max : 20  mVp-p
3dB Antenna Beam Width -Azimuth	Typical :81  cel
3dB Antenna Beam Width - Elevation	Typical :36  cel
Operating temp	Min : -20, Max : 55  cel
Storage temp	Min : -30, Max : 70  cel
Pulse Width	Min : 5  uSec
Duty Cycle	Min : 1  %
Average Current(@5% duty)	Typical :2  mA
Frequency(±12.5)	Typical :10525  MHz

Dimension Diagram: